Sleeve Bearings
Sleeve bearings can be made from bronze, steel or stainless steel. Brass bearings and plastic sleeve bearings are also manufactured for certain applications. A common type of sleeve bearing that works well in applications requiring constant lubrication is bronze sleeve bearings, which sometimes contain lubricant plugs (PTFE or graphite) to help with lubrication issues. Another sleeve material used for light to medium applications, called oil impregnated bronze sleeve bearings, contains pores that absorb oil, which is released under applied force and then reabsorbed back into the bearing once the force subsides.
Sleeve bearings offer several advantages, including lower cost, less maintenance, greatly reduce noise at low speeds and easier installation. Sleeve bearing performance is also marked by a higher load capacity, especially shock load resistance due to their greater contact zone. Sleeve bearings with a conformal liner compensate for misalignment issues and vibration damping, these one-piece design low-friction bearings reduce housing dimensions and weight by having a thin wall section.
- ISOSTATIC CB-6876-40 Sleeve Bearings
- 1600
- Single Row Non-Fill
- ISOSTATIC SS-5470-32 Sleeve Bearings
- Open Type
- 0.02 KGS
- ISOSTATIC CB-6480-48 Sleeve Bearings
- 3460 lbf
- 5820 lbf
- ISOSTATIC SS-5470-28 Sleeve Bearings
- Flange Block
- 0.0
- ISOSTATIC CB-6480-40 Sleeve Bearings
- 5mm
- Standard
- ISOSTATIC AA-1803-1 Sleeve Bearings
- ABMA
- 140 mm
- ISOSTATIC SS-5264-48 Sleeve Bearings
- 1.3750 in
- Two Contact Seals
- ISOSTATIC SS-5264-40 Sleeve Bearings
- 26600 lbs
- Four-Bolt Piloted
- ISOSTATIC AA-1803-7 Sleeve Bearings
- Right Hand
- Zinc-Plated Steel
- ISOSTATIC SS-5264-32 Sleeve Bearings
- Steel
- 2.8125 in
- ISOSTATIC SS-5264-24 Sleeve Bearings
- Male Threaded with M
- 0.3125 in
- ISOSTATIC SS-5260-36 Sleeve Bearings
- Medium Duty
- UCX13-40