Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- SKF 6344 M/C3 Single Row Ball Bearings
- 86mm
- In Stock
- SKF 6210/C3 Single Row Ball Bearings
- 90.000 mm
- 5000 rpm
- TIMKEN 61911 Single Row Ball Bearings
- 0.7185inch
- 72mm
- 2 mm x 6 mm x 3 mm SKF W 639/2-2Z Single Row Ball Bearings
- 53.975 mm
- 49.8 kN
- 55,58 mm x 100 mm x 33,34 mm TIMKEN W211PP2 Single Row Ball Bearings
- 19.431mm
- In Stock
- 49,23 mm x 90 mm x 30,18 mm TIMKEN W210PPB2 Single Row Ball Bearings
- 0.02 KGS
- Open Type
- SKF 6009-2Z/C3GJN Single Row Ball Bearings
- 2.3626
- Standard
- TIMKEN 16015 Single Row Ball Bearings
- 65mm
- Open Type
- TIMKEN 16014 Single Row Ball Bearings
- 33.30 mm
- 43000 N