Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 17 mm x 40 mm x 13,67 mm TIMKEN 203KL Single Row Ball Bearings
- 3mm9311wicrdum-timke
- Standard
- 17 mm x 40 mm x 13,67 mm TIMKEN 203KLD Single Row Ball Bearings
- 1400 rpm
- 830000 N
- 17 mm x 40 mm x 12 mm TIMKEN 203KG Single Row Ball Bearings
- Two Metal Shields
- 4mm
- 17 mm x 40 mm x 12 mm TIMKEN 203KDDG Single Row Ball Bearings
- Standard
- Open Type
- 20 mm x 47 mm x 15,24 mm TIMKEN 204KLD Single Row Ball Bearings
- 2800 rpm
- 2200 rpm
- 20 mm x 47 mm x 14 mm TIMKEN 204KG Single Row Ball Bearings
- HMV 38 E
- 190 mm
- 20 mm x 47 mm x 14 mm TIMKEN 204KDDG Single Row Ball Bearings
- Two Metal Shields
- 14mm
- SKF 6310 2ZNRJEM Single Row Ball Bearings
- 5600 r/min
- 0.35
- SKF 6308 2ZNRJEM Single Row Ball Bearings
- Open Type
- 31.20 KGS
- SKF 6212 2ZNRJEM Single Row Ball Bearings
- 29000
- 30mm